We – EPG Team the largest worm gearbox, couplings and gears manufacturing facility in China with 5 diverse branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
MY E Series
- Specifications:
Product | Unit | MY1two00E | MY1300E | MY1500E |
Max. Paper Size | mm | 1200X780 | 1300*960 | 1500X1100 |
Min. Paper Size | mm | 350X350 | four hundred*410 | 500X410 |
Max. Die-chopping Size | mm | 1180X760 | 1280*940 | 1480X1080 |
Max. Speed | sh/h | -5500 | -5500 | -4500 |
Max. Wor ept Pressure | T | three hundred | 300 | 300 |
Max. Paper Thickness | mm | 1-seven | one-7 | 1-seven |
Die-reducing Precision | mm | ±0.five | ±0.five | ±0.five |
Total Power | KW | fifteen | 15 | 19 |
Complete Bodyweight | kg | 13500 | 15000 | 18000 |
General Dimension | mm | 6730*4230*2145 | 7250*4530*2145 | 7700*4795*2205 |
- Features of the machine:
Primary Characteristics:
- The Bobst type reduce structure tends to make the cutting system movement like a scissor, it will understand a total and less difficult minimize.
- Principal worm gear utilizes alloy copper material, soon after the knowledgeable operator’s handbook scraping treatment method and rigorous normal testing, it can assures the driving parts 10 several years life.
- The principal chains undertake imported British Renold manufacturer, the variations of 10 chains are much less than .2mm.
- The link in between gear box and driving shaft adopts sleeve and pin construction guaranteeing a powerful relationship.
- Speed:
The equipment adopts frequency controller to obtain stepless velocity acceleration which can reach to 4500 moments for each hour. Throughout genuine generation, it can usually operate at 3600 to 4000 times per hour according to the quality of the board. If the quality of the paper is great, a good operator even can run the device at 4200 moments for each several hours without having feeling too tough.
- Safety:
As it is proven in the photo of the equipment, the machine adopts rear portion paper feeding technique which retains the operator away from the die-cutting component. The mounting and adjustment of the die plate is also done outside of the die-reducing portion with sensors and detectors at die-reducing part to make certain that the equipment can not be started out when the die-slicing plate is at adjustment standing.
In addition to the sensors at die-cutting portion, there are sensor or method switches at window element to make the whole equipment at monitoring standing to ensure its safety.
- Procedure usefulness:
There is Male-device interface mounted in the control panel which will exhibits the security position of the machine as properly as malfunctions to aid the operator. Camera is also mounted in front of the operator for him/her to check the procedure status at the supply element.
- Major Buildings and Crucial Substance Employed
- 4 Primary Big Areas:
They are referring to: base station, moving platform, upper system and equipment wall. The bottom station is produced of gray cast iron -HT two hundred the transferring system is ductile iron – QT 42-10 and the device wall is high quality A3 metal.
- Main Generate:
The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm equipment types a shifting set to ensure secure pressure out put of not less than 300 tons.
The content for the worm shaft is 40Cr with quenching treatment and gear hardness HRC forty five-fifty. the material for the worm is copper alloy – ZQAL9-4.
The bearing that is used is SKF. The bush is copper alloy ZQSn6-6-3.
- Die-reducing and Creasing Part:
The push is transferred through crank rod to pendulum which will deliver the transferring system to go up and down to reach die-cut and creasing objective.
The pendulum is created of high top quality ductile iron. The pendulum axis is carried out by induction harden with surface area hardness HRC forty three-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely adhere to the specification of 1080 kind automated die-chopping and creasing machine. In comparison with automatic die-slicing and creasing machine which is utilized for cardboard die-cutting, this sort of semi-automated die-reducing and creasing equipment is largely utilised for corrugated board which requirements less force for die-chopping, in this case really some producers have created smaller sized width on the pendulum and smaller sized diameter on the pendulum shaft. We preserve broader pendulum and bigger diameter on its shaft to make our device last for a lengthier existence.
The die-cutting plate employs 7 mm seventy five Crl plate which has much more hardness and existence span than the manganese plate.
- Board Conveying:
It adopts 3-cam intermittent positioning unit to ensure the boarding conveying precise and steady.
The machine utilizes gripper bar variety with 12A extended joints chain which is considerably less in bodyweight and significantly less shock to the intermittent device under the precondition to make sure the toughness of the chain. The model of the chain is Remold U.K with high exact and quality. .
The Gripper bar adopts aviation aluminum with three bridge kind- light-weight in fat and higher in toughness.
- Electric powered Element
The electrical areas are developed and assembled according to the European CE normal and uses world broad acknowledged brand name products.
- Installation of Die
The die mounting and dismounting adopts facet withdrawing techniques which time saving and effortless for procedure.
There are two methods for the fixation of the die-either by bolt or clippers which are subject to customer’s advice.
The chase loc ept is pneumatic which is simple, convenient and trustworthy.
- Unique Figures of Our Equipment:
- Clever And Special Front Lay Layout:
When compared with the card board sheet, the corrugated board has much more toughness. If the corrugated board abnormally reaches to the entrance lay, it will injury the entrance lay and the gripper bar when the entrance lay reaches to its greatest situation.
Usually the producers will put in sensors on this portion to quit the equipment when the paper is fed abnormally to the entrance lay. Nonetheless, when the device is managing at the large speed, the inertia will deliver the machine to run for a whilst to make the entrance lay to its highest stage and then also injury the front lay and the gripper bar.
Our specific design and style is that when the abnormal board feeding takes place and becoming detected, the entrance lay can never reaches to its greatest level which tends to make totally free from front lay and gripper bar damages simply because of abnormal paper feeding.
As it is our special design, so there is no photograph to be proven here.
- Optional Delivery Platform:
In accordance to the requirement of the client we can do the delivery system both sq. sort or E type (as proven in the photo) . If the client has adequate pallets, he can pick square sort. If the client does have enough pallet, he can pick, E type platform for which will also supply 4 supply trolleys.
- Pneumatic Preloading and Lifting Step Unit:
The preloading device is pneumatic pushed. When a single paper measurement is established, when you do other pile of preloading, there is no trouble of you to reset the preloading system, you can just push the button and the machine will do for you.
The lifting step device is also pneumatic to facilitate the conveying of the paper pile.
- Dancing Roller Feeding:
Fairly some of the die-chopping device producers use direct feeding technique which is the operator will feed the board straight to the mouth of the gripper. What we have found that the feeding time to the gripper is only .3 seconds which can make the board feeding work hard and inaccurate.
Our device utilizes an extra dance roller feeding program whose board feeding time can be increase to .6 second. With each other with the conveying components it tends to make an less complicated perform of the operator and more quickly in effectiveness of the machine.
For example: If an operator operates the immediate feeding semi-automated die-reducing device at 3300 sheets per hour, he can easily operate our device at 3700 – 4000 sheets for every hour.
- Conveying Component:
The board acquired by the dance roller will go by way of a conveying part with belt conveying and belt pressing which tends to make the board currently being pressed just before achieving to the front lay.
Before the board reaches to the entrance lay, he will be repositioned by the side lay.
By these approaches, the board conveyed by the dance roller will be a lot more correct and stable when they get to to the gripper bar.
There is also detector to detect the position of the board. If board does not arrive to the front lay at regular situation, the detector will send alerts to cease the equipment.
- Configurations:
Identify | Brand and Origin | Remarks |
Bearing | SKF Swiss | Crucial element |
IKO Japan or HangZhou, China | Not crucial portion | |
Chain | Renold U.K | Main Chain ( Discrepancy of considerably less than .2 mm for for every ten chains of device chain length) |
CHOHO Japan | Other Chain are Choho Japan | |
Relay | Omron Japan | |
Contactor, buttons | TELEMECANIQUE France |
|
Photo Electrical Swap | Fotek ZheJiang | |
Stabilizer | MEANWELL ZheJiang | |
Variator | Delta ZheJiang | |
Major Motor | Siemens | Joint Venture |
PLC | Delta, ZheJiang | |
Gentleman-device Interface | Delta | |
Pneumatic Elements | Sunrise, ZheJiang | |
Rotary Joints | SMC Japan | |
Motor at feeding and shipping and delivery | CPG ZheJiang |
/ The use of unique gear manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the shown replacement parts contained herein are not sponsored, accredited, or manufactured by the OEM. /