1.A connecting website link of an O-ring Chain for general application is pre-coated with grease with the pins. Just before connection, confirm the grease within the surfaces of pins, and in the event the amount of grease is modest, apply grease with bare hands. (If gloves are made use of, the grease might be absorbed through the gloves.)
Example: Once the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots from the pins. In case the O-rings come loose due to vibration for the duration of transport, refit the O-rings in towards the roots from the pins.
In this instance, you should definitely return the grease collected at the roots on the pins towards the central surfaces in the pins, extra at portion A than at portions B proven inside the above illustration. (Portions A is worn because of sliding using the bushings.)
two.The chain is often most simply connected around the teeth of a sprocket. Engage the hyperlinks at each ends with the chain together with the sprocket teeth and fit connecting pins. If your sprocket is usually moved, the chain may also be connected around the loosened side.
3. Connecting procedure
one.Verify that O-rings are connected for the roots of the pins.
2.In case the amount of grease applied about the connecting pins is tiny, coat the pins with grease at the central portions.
3.Insert the connecting pins to the bushings of your inner hyperlinks at each ends.
four.Confirm the grease is applied on the entire encounter of the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and whilst pressing the connecting plate, set up the spring clip. Confirm no matter whether the head (the finish with no split) of your spring clip is turned in the feeding path on the chain. (See the next illustration.)
six.Make sure to confirm the spring clip is securely fitted from the clip grooves in the connecting pins.
This completes jointing on the connecting website link. Note that grease on the surfaces of connecting pins and O-rings is usually removed in the course of installation function. In this case, re-grease using the grease around the surface in the base chain or even the grease within the polyethylene bag in which the connecting hyperlink was contained.