General Description
Equipped together with the zero leak bidirectional checking sole-noid valves, this power unit is created for your operation of two independent circuits. Which are respectively for your most important and subordinate platforms of the double scissors lift. Two cut-off valves are used for lowering the machine manually in case of energy reduction. If extra independent circuits are necessary to your application please speak to us for availability.
Remark: one. Please consult our sales engineer for that distinct pump displacement, motor electrical power or tank capability.
2. CSA or UL licensed motors can be found upon request.
Distinctive Notes
1. The AC motor is of S3 duty cycle, which may only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned ahead of installation of the power unit.
three. Viscosity of the oil shoud be 15~46 cst,as well as the oil should be clean and cost-free of impurities,N46 hydraulic oil is proposed.
4. The electrical power unit should be mounted vertically.
five. Check the oil level in the tank right after the initial operating in the energy unit.
six. Oil transforming is required right after the preliminary one hundred operation hours,afterwards the moment each and every 3000 hrs.