DUMP TRAILER Power UNIT- SINGLE ACTING
This power unit has a energy up gravity down circuit. Get started the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve can be provided if essential. Also a pressure compen sated flow manage might be added towards the circuit to control the descent velocity from the cylinder.
Remark: Please check with our product sales engineer for your distinctive pump displacement, motor power or tank capability.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned in advance of installation of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities.N46 hydraulic oil is advised.
four. The energy unit really should be mounted horizontally.
5. Check the oil level from the tank immediately after the preliminary working with the electrical power unit.
six. Oil altering is needed soon after the first one hundred operation hours, afterwards as soon as each 3000 hrs.
DUMP TRAILER Energy UNIT-DOUBLE ACTING
This power unit features a energy up energy down circuit with load holding on both A & B ports. A strain compensatred movement management can be extra to circuit to regulate the decent velocity from the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned in advance of installation of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of impurities. N46 hydraulic oil is proposed.
4. The power unit should be mounted horizontally.
five. Check the oil degree inside the tank after the preliminary working of your energy unit.
six. Oil shifting is needed following the initial a hundred operation hrs, afterwards once every 3000 hrs.